Sunfire-V210

From The System Administrator Zone

Setting Boot Diag Levels

The default factory settings are very, very noisy.

{1} ok setenv diag-level min
diag-level =          min
{1} ok setenv diag-switch? false
diag-switch? =        false
{1} ok

Running a probe

You must first turn off the auto-boot? flag and reset all the bus stuff...

{1} ok setenv auto-boot? false
auto-boot? =          false
{1} ok reset-all

You must then reset the auto-boot? flag to allow automatic reboots.

{1} ok setenv auto-boot? true
auto-boot? =          true
{1}

Probe SCSI devices

This probe is a sample.

{1} ok probe-scsi-all
/pci@1c,600000/scsi@2,1

/pci@1c,600000/scsi@2
Target 0
  Unit 0   Disk     SEAGATE ST373207LSUN72G 045A
Target 1
  Unit 0   Disk     SEAGATE ST373207LSUN72G 045A

{1} ok

Probe IDE devices

This probe is a sample.

{1} ok probe-ide
  Device 0  ( Primary Master )
         Removable ATAPI Model: DV-28E-N

  Device 1  ( Primary Slave )
         Not Present

  Device 2  ( Secondary Master )
         Not Present

  Device 3  ( Secondary Slave )
         Not Present

{1} ok